3 Signs It’s Time to Have Your Water Heater Looked At

Water Heater Service

Hot water is such a part of our lives that we barely think about the convenience of it. When our water heater starts acting up, then our entire household can be disrupted. Washing dishes; doing laundry; washing our hands; taking showers: we rely on hot water for cleanliness and comfort. There are a few signs that your water heater needs a water heater service specialist.

Your Water Heater is Making More Noise

A loud water heater is not normal. As long as you are still getting the hot water you might think it’s fine, but this is a sign of sediment build-up along the bottom of your water tank. Since our water heaters heat and reheat water constantly, it causes sediment to build up. So even though your water heater is still producing hot water, it’s harder for it to do so. Getting the sediment cleaned out could extend the life of your water heater and make your water heater more energy-efficient.

If your water is a rusty color, this could be another sign of sediment build-up or rust. It’s best to get your water heater serviced before it goes out and you are left with no hot water until it’s fixed or replaced.

There is Water around Your Water Heater

A leak in your water heater is caused by a couple of things. The first possibility is not with the water tank itself, but the fittings around your water heater or the pressure overflow pipe. These are relatively easy to fix, but they should be done by a professional water heater service technician.

The other reason is that a small crack has formed in your tank. The constant heating of the metal tank makes it expand, then it shrinks as it cools. Over time this expanding and cooling can cause a crack to form. At first, the crack will still be able to keep the water in, but as your tank continues to expand and shrink, the crack will get worse.

Once you notice a leak, it’s important to get it looked at right away. Leaks only get worse, and the water damage that could result from a leak that isn’t stopped will make a simple repair bill into a much larger bill.

Water Heaters Don’t Last Forever

Your average water heater has a lifespan of between 8 to 10 years. This can vary a bit depending on the type of water heater. If you have lived in your home for less than 8 years and are having issues with your water heater, then you may not need a replacement, just some maintenance. The problem is if you notice an issue and don’t get it fixed, you can go from maybe needing a part replaced to needing a new water heater. Calling a water heater service technician can save you money. At Team Rooter, we know how to help your water heater last as long as possible.

Regular maintenance is important for so many areas of your home, including your water heater. When the time comes to replace it, we can help determine the best and most energy-efficient option for you. Don’t wait until you don’t have hot water. Give us a call today!

3 Ways to Prolong Water Heater Repair

water heater repair

Do you want to make your water heater last throughout the years? Performing simple tasks such as maintenance checks, checking the anode rod, and cleaning the water heater tank will expand the overall life of your water heater. You’ll no longer have to worry about high energy bills or deal with low-quality water supply. Now let’s take a look at three ways to make your water heater last longer: 

Perform Regular Maintenance Checks  

If you want to extend the life of your water heater, you should perform regular maintenance checks. In performing a maintenance check, it’s essential to look for any signs of leakage or damage that might have occurred. It’s important to act fast if you see any signs of leakage since a small leak can turn into flooding in your basement. Fixing a leak may be as simple as tightening a pipe. However, if you see cracks in the tank of your water heater then it might have to be replaced. 

Check the Anode Rod  

Have you heard of an anode rod? If not, don’t worry. An anode rod is a piece of metal that’s installed in a water heater to prevent the water heater tank from collecting rust. It works by attracting all of the corrosion before it reaches the contents of the water heater. However, if an anode rod is fully corroded, then the water heater may become rusted and exhibit irreparable damage. In order to make your water heater last longer, check the anode rod at least once a year. If it looks rusted or almost completely covered in corrosion, then it’s best to replace it through a water heater repair service.

Flush and Clean Your Water Heater Tank 

If you want to make the best of your water heater, then you should flush and clean your water heater tank. Just drain a few gallons of water out of your water heater and into a bucket to analyze its contents. If the water contains dirt, debris, and other sediments, you should execute a thorough cleaning of your water heater. Since the build-up of dirt and debris can cause your water heater to stop working efficiently, it may not only affect you but your bills too. Some water heaters come with self-cleaning mechanisms. However, you should still flush and clean your water heater at least every three years.  

Now that you know some ways to make your water heater last longer, don’t hesitate to get to work. If you want to consult a professional, contact Team Rooter. With experienced technicians and affordable rates, Team Rooter provides the best plumbing service in LA. By offering a wide variety of services, we can do it all. From sewer line replacement to water heater repair, you’ll never need another plumbing service as long as you have Team Rooter. For more information about our services, visit our website.